DIY Jewelry Holder

Materials:
-one picture frame with no back
-burlap (I bought 1/2 a yard, depends on how big frame is)
-"Cup" Hooks, 7/8" (number varies on how many necklaces you want to hang from it)
-staple gun
-scissors
-drill (optional)

I bought a 10" x 14"

To begin, I cut the burlap to fit the frame. I laid the frame on top of the burlap and cut an inch in on both the top and bottom, left and right. (use a Sharpie to mark)

After the burlap was cut, I used the staple gun to hold it onto the frame. IMPORTANT: Make sure you staple the inner part of the frame, not the very back. I had to redo mine because the earrings wouldn't go in, otherwise the wall would have blocked it.

Lastly, I spaced the nine hooks I had and drilled a tiny whole. It's optional if you want to use a drill or not, but it will make it a lot easier to get the screws into the wood. Again, mark with a Sharpie.

Final Product!

Please leave questions or comments for me to answer! Hope it works for you! :-)